A flower from the remnants of the ribbon

Each needlewoman is faced with a problem, the tape is a few centimeters, and it is a pity to throw out. But they also have a use. You can make a beautiful hairpin with a flower even from small remnants of ribbons. To create such a flower you need: - squares of satin ribbons of five different shades of blue, with sides of 5 cm. - scissors. - cabochon light blue. - lighter. - click-clak clip. - stamens with blue heads. - green ribbon of satin 25 mm wide.
The sequence of work. First you need to put in front of you all 5 prepared squares of different shades of blue.
 A flower from ribbon remnants
You must make a separate petal from each. First, take one square and simply bend it diagonally.
A flower from the remnants ribbons
The cuts of the obtained triangular part must be gathered together by foldssqueezing with your fingers.
Flower from ribbon remnants
The edges of the parts are slightly curved, so you need to cut them with scissors, aligning the slice.
 The flower from the remnants of the ribbon
Then, with a lighter fire, you should strongly scorch the edges of the folds of the ribbon so that they are soldered together and retain their shape. https://sdelaysam-svoimirukami.ru/images/20/1343-cvetok-iz-ostatkov- lenty.jpg "alt =" A flower from ribbon remnants "title =" A flower from ribbon remnants ">
It turned out a rounded petal for a future flower, the remaining 4 squares should be subjected to similar processing.
A flower from the remnants of the tape
Multicolored blanks are made. Now you need to make leaves. For this you need a green ribbon. From it you will need 2 segments of 4 cm.
 Flower from tape remnants
The width of the piece must be doubled.
 A flower from ribbon remnants
The edge at the top must be cut at a slight incline. The oblique cut should be immediately melted down with fire and at once squeezed the seam with your fingers so that the two layers of the tape are fastened together.
 A flower from ribbon remnants
It turned out a simple leaf, the second is done same.
Flower from ribbon remnants
Now p There was a line of blue stamens. They need to be glued together in twos.
 A flower from ribbon remnants
You should glue the stamens together in the center of the leaves, but so that they do not strongly protrude beyond the edge of the green ribbon. A flower from the remnants of the tape Now you should make a flower from the prepared colored petals, connecting them into a circle.
 Flower from remnants of ribbon
Two leaves should be glued to the rainbow flower, to the wrong side, putting them at a short distance.
 Flower from the remnants of the ribbon
From the bottom of the flower you need to attach the edge of the hairpin.
 Flower from ribbon remnants
It remains only to attach a light blue cabochon in the center flower.
Flower from ribbon remnants
A multi-colored flower from ribbon remnants is ready!

Related News

Where does the annoyance come from
How to prepare for a week of starvation
Quiz: Find out if you are a perfectionist or not
How to drink creatine
How to choose a remedy for hemorrhoids