Two Methods for Creating Dashed Lines
How to Compare Two Methods of Creating a Spherical Helix
Steps
 Become familiar with the images you'll be creating:
Tutorial #1

For this article, create a new workbook and create the following worksheets:Data, later copy it to become Data (2), Chart1, Chart2 and Saves. 
Set Your Preferences:Open Preferences in the Excel menu and follow the directions below for each tab/icon.
 In General, setR1C1to Off and selectShow the 10 Most Recent Documents.
 In Edit, set all the first options to checked exceptAutomatically Convert Date System. SetDisplay number of decimal placesto blank (as integers are preferred). Preserve the display of dates and set 30 for 21st century cutoff.
 In View, click on showFormula BarandStatus Barand hover forcomments of all Objects. CheckShow gridlinesand set all boxes below that to auto or checked.
 In Chart, allowShow chart namesand setData markerson hover and leave the rest unchecked for now.
 In Calculation, Make sureAutomaticallyandCalculate before saveare checked. Set max change to .000,000,000,000,01 without commas as goalseeking is done a lot. CheckSave external link valuesandUse 1904 system
 In Error checking, check all the options.
 In Save, selectSave preview picture with new filesandSave Autorecoverafter 5 minutes
 In Ribbon, keep all of them checked exceptHide group titlesandDeveloper.

It helps by placing the cursor at cell A16 and doing Freeze Panes.Edit Go To cell range A1:H2912 and Format Cells Number Number Decimal Places 4, Font Size 9 or 10,

Enter the upper Defined Name Variables Section on the Data worksheet (here's a picture):
 Cell A1: enter AjRows
 B1: enter GM (for Golden Mean)
 C1: enter Factor1
 D1: enter KEY
 E1: enter Thickness
 A2: 2880
 B2: "=((1SQRT(5))/2)" w/o quotes and Format Cell Number Number Decimal Places 8
 C2: "=VLOOKUP(ABS(Spheroids),Looker,IF(Spheroids<=24,2,3))"
 D2: "=IF(Spheroids<=24, Spheroids*VLOOKUP(Spheroids,LOOKER2,2),Spheroids)"
 E2: .5 and Format Cell Number Number Decimal Places 1. Insert New Comment "This controls the ring size." Format cell Fill yellow, Border red bold outline.
 Select cell range A1:E2 and Insert Name Create Names in Top Row, OK.
 F2: "=2^6*3*PI()*103" w/o quotes, which equates to Tip's value.
 A3:: Tip
 B3: Base
 C3: Spheroids
 D3: ShrinkExpand
 E3 103 and Format Cell Number Number Decimal Places 0. Format cell Fill yellow, border red bold outline. Insert New Comment "Primes that work up to 107 are: (1),13,17,(29),(31),43,47,(59),(61),73,77, (89),(91),103,107 and 1 turns the other way … as does 107, with parentheticals having only half the turns or so ...823 and 827 are good, as are 1037, 4813. This is the pattern: 13, 17 + 30 = 43,47 + 30 = 73, 77 + 30 = 103, 107 ... 13, 17  30 = 17, 13 which are both good!! So ±13±30n or ±17±30n, n={0,1,2,3,...}. Other primes and nonprimes yield interesting results, but they're not spheres."
 F3: Prime
 Select cell range E3:F3 and Insert Name Create Names in Right Column, OK.
 A4: "=2^6*3*PI()*Prime" w/o quotes
 B4: "=2^4*Prime" w/o quotes
 C4: 24 and Format Cell Fill Light sky blue.
 D4: .5 and Format Cell Fill yellow
 Select cell range A3:D4 and Insert Name Create Names in Top Row, OK.

Enter the column headings of rows 4 and 5:
 A5: Base t
 B5: constant c
 C5: Cos
 D5: Sin
 E4 and F4: METHOD 1
 E5: Main X
 F5: Main Y
 G4: M1M2 and G5 DIFF and copy G4:G5 to H4:H5.
 Command + Select cell range A1:H1, A3:D3, A5:H5, E4:H4 and F3:H3 and Format Cell Fill White Font Electric Purple Bold. Select cell range A5LH5 and Format Cells underline. Select cell range C4, E2:E3, F2, E4:H5 and Format Cell Font Size 14.

Enter the column formulas
 A6: "=IF(ODD(Spheroids)=Spheroids,0,Tip)" w/o quotes and Format Fill light rose.
 Edit Go To cell range A7:A2886 and enter to A7 w/o quotes the formula "=((A6+(Tip*2)/(AjRows)))" and Edit Fill Down. The bottom entry should match the top one, except that it's negative.
 B6: "=(Base*24/Spheroids)" w/o quotes and Format cell Fill light rose.
 Edit Go To cell range B7:B2886 and enter to B7 w/o quotes the formula "=A6" and Edit Fill Down.
 Edit Go To cell range C6:C2886 and enter to C6 w/o quotes the formula "=Thickness*Spheroids/KEY*(COS((ROW()6)*PI()/180*Factor1))" and Edit Fill Down.
 Edit Go To cell range D6:D2886 and enter to D6 w/o quotes the formula "=Thickness*Spheroids/KEY*(SIN((ROW()6)*PI()/180*Factor1))" and Edit Fill Down.
 Edit Go To cell range E6:E2886 and enter to E6 w/o quotes the formula "=((SIN(A6/(B6*2))*GM*COS(A6)*GM*(COS(A6/(B6*2)))*GM)+C6)/ShrinkExpand" and Edit Fill Down.
 Edit Go To cell range F6:F2886 and enter to F6 w/o quotes the formula "=((SIN(A6/(B6*2))*GM*SIN(A6)*GM*(COS(A6/(B6*2)))*GM)+D6)/ShrinkExpand" and Edit Fill Down.
 The results in C2886:F2886 should match C6:F6.

Create the Lookup Tables
 Enter LOOKER into cell K5. Edit Go To cell range K6:K2180 and enter 1 into cell K6. Do Edit Fill Series Column Linear Step Value = 1, OK. Edit Go To cell range L6:L180 and enter .125 into L6 and Edit Fill Down. Edit Go To cell range M5:M180 and enter 0 to cell M5. Do Edit Fill Series Column Linear Step Value = 0.004166667, OK. Edit Go To cell range K6:M180 and Insert Name Define Name LOOKER to cell range $K:$M0. Format Border red bold outline..
 Enter LOOKER2 into cell O5. Edit Go To cell range O6:O29 and enter 1 into cell O6. Do Edit Fill Series Column Linear Step Value = 1, OK. Edit Go To cell range P6:P29 and enter the following values from top to bottom: P6: 24, 16, 8, 4, =PI(), =PI(), =PI(), 2 from P13 to P21 and 1 from P22 to P29 via Edit Fill Down. Edit Go To cell range O6:P29 and Insert Name Define Name LOOKER2 to cell range $O:$P. Format Fill yellow and Border red bold outline.
Explanatory Charts, Diagrams, Photos
 (dependent upon the tutorial data above)

Create the Method1 full Chart
 Edit Go To cell range E6:F2886 and select either Charts from the Ribbon or Chart Wizard. Select All/Other, and scroll down to Scatter Smooth Lined Scatter. If in Chart Wizard, a new Chart sheet will open for you, otherwise, a Chart will land atop the data to cut or copy and paste to the Chart worksheet's upper left hand corner. Hover over the lower right corner until the cursor become a doubleheaded arrow, then grab the corner and pull it down and to the right to form a square. Click in the Plot Area and select Chart Layout from the Ribbon and get rid of the axes, grid lines and legend. Resize the chart to be 5.55" x 5.55" and drag it to the center of the page. Select Chart Layout Series 1 and choose Line Color blue, Weight 1. Here's the chart:

Create the Method1 partial Chart
 Edit Go To cell range E6:F246 (the first two spheroids) and select either Charts from the Ribbon or Chart Wizard. Select All/Other, and scroll down to Scatter Smooth Lined Scatter. If in Chart Wizard, a new Chart sheet will open for you, otherwise, a Chart will land atop the data. Move it to the right and format the scales as follows. Horizontal Minimum=.65, Maximum=1.35, Major Unit = .35, Vertical axis crosses at .65. Vertical: Minimum = 1.25, Maximum=.625, Major unit=.075, Horizontal Axis crosses at 0.0 I realize this cuts a shade off the top and that's pertinent. The spheroids should appear as fairly good spheres once you size the graph to be W= 4.92" x L = 5.5". Select Chart Layout Series 1 and choose Line Color blue, Weight 1. Here's the chart:
Tutorial #2

That completes the Method1 spreadsheet for now, except that I have Inserted a New Comment for important formulas I might overwrite, copying the formula from the formula bar into the new comment.To create the Method2 spreadsheet, do menuitem Edit Move or Copy Sheet, with the Create a copy box checked, before sheet Chart and after sheet Data, to the same workbook, make a copy of the Data worksheet just done and title it Data (2) if not done so automatically. I may refer to this worksheet as the Method2 worksheet, instead of Data(2)  both terms refer to the same sheet.

Enter the Column Formulas for Data(2) that are different from Data:
 Cos: Edit Go To cell range C6:C2886 and enter to C6 w/o quotes the formula "=(COS((ROW()6)*PI()/180*Factor1))" and Edit Fill Down. Done away with are Thickness and KEY.
 Sin: Edit Go To cell range D6:D2886 and enter to D6 w/o quotes the formula "=(SIN((ROW()6)*PI()/180*Factor1))" and Edit Fill Down. Done away with are Thickness and KEY.
 The results in C2886:F2886 should match C6:F6.

Enter the Defined Variables Section that changes for Method2.Here is a picture:
 B1: Change GM to GM=Other
 B2: Enter .75 (a lucky guess on my part but .8 works, and .1 does not).
 A4: Enter "=Base*12*PI()" w/o quotes
 B4: Enter "=16*103"w/o quotes
 F3: Delete the word Prime. Copy F3 and paste it to D1:E2, then to E3.
 Command Select A1:F1, F2, A3:F3, E3:H3, A5:H5 and Format Font red. Select A5:H5 and Format underline. Command + Select F2, E4:H5 and do Font Size 14.
 G1: Enter 2880, the number of rows (approx).
 H1: Enter "=Spheroids" w/o quotes
 G2: Enter Rows/Sphere
 H2: Enter "=G1/H1" w/o quotes

Enter the Difference Column's formulas
 Select cell G6 and enter, w/o quotes, the formula "=Data!E6'Data (2)'!E6" which very much depends upon what titles you've given your worksheets.
 Copy G6 and paste it to cell range G6:H2886.
 Select cell G2887 and enter w/o quotes "=SUM(G6:G2886)" and copy it and paste it to H2887. My results are 0 and 0 and yours should be too, though there are plenty of individual differences in the cells above. However, a MAX() formula informs one that the largest difference is .0251 for x and .025 for y.
Explanatory Chart  Tutorial #2
 (dependent upon the tutorial data above)

Create the Chart for Data(2) / Method2
 Edit Go To cell range E6:F2886 on Data (2) and select either Charts from the Ribbon or Chart Wizard. Select All/Other, and scroll down to Scatter Smooth Lined Scatter. If in Chart Wizard, a new Chart sheet will open for you, otherwise, a Chart will land atop the data to cut or copy and paste to the Chart worksheet's upper left hand corner. Hover over the lower right corner until the cursor become a doubleheaded arrow, then grab the corner and pull it down and to the right to form a square. Click in the Plot Area and select Chart Layout from the Ribbon and get rid of the axes, grid lines and legend. Resize the chart to be 5.55" x 5.55" and drag it to the center of the page. Select Chart Layout Series 1 and choose Line Color red, Weight 1. Here's the chart:

Create the Method 2 Partial chart
 Edit Go To cell range E6:F246 on Data (2) (the first two spheroids) and select either Charts from the Ribbon or Chart Wizard. Select All/Other, and scroll down to Scatter Smooth Lined Scatter. If in Chart Wizard, a new Chart sheet will open for you, otherwise, a Chart will land atop the data. Move it to the right and format the scales as follows. Horizontal Minimum=.65, Maximum=1.35, Major Unit = .35, Vertical axis crosses at .65. Vertical: Minimum = 1.25, Maximum=.625, Major unit=.075, Horizontal Axis crosses at 0.0 I realize this cuts a shade off the top and that's pertinent. The spheroids should appear as fairly good spheres once you size the graph to be W= 4.92" x L = 5.5". Select Chart Layout Series 1 and choose Line Color red, Weight 1. Here's the chart:

Analyze the spheres into thirds (beginning, middle, end) and look for a pattern between the two methods:
 Select on the Data worksheet cell range E6:F:45 and do Format Cell Border red bold outline. In cell G45, enter "=SUM(E6:E45)SUM('Data (2)'!E6:E45)". Copy it and paste it to cell H45 and select G45:H45 and Format Cell Border Border red outline.
 Copy E6:H45 and paste it to E46. Select E86 and paste it again. Select E126 and paste again.
 Command+Select cell range E46:F85, G85:H85 and Format Fill yellow and Border red bold outline. Command+Select cell range E86:F125, G125:H125 and Format Fill light blue and border red bold outline.
 Copy E6:H125 and paste to E127 and repeat this process until you've reached down to cell H2885, grabbing larger and larger chunks done to copy and paste as your go, bearing in mind that at 1445, you're at the midpoint. Outline the final row in bold red.
 F2887, aligned right: TOTAL DIFFERENCE. Enter to G2887 "=SUM(G6:G2886)" and copy and paste to to H2887. Totals = 0 and 0.
 Resplit the window above Total Difference, with room for 24 row entries beneath it. Do not freeze panes.
 E2888: Sphere Number
 F2888: Sphere Subsection
 H2888, aligned right, bold red text: THE PATTERN:
 E2889: Enter 1 and Format Cell Number Number Custom "00)" with quotes.
 E2892 and every 3rd cell below it until Sphere 8 is reached: Enter "=E2889+1" and copy this to every third cell beneath it.
 F2889: Enter 1 and Format Cell Custom as above, "00)". F2890: Enter 2. F2891: Enter 3. These are the the 3 sections of each sphere. Copy F2889 and Paste Special Format to cell range F2890:F2891. Copy F2889:F2891 and paste it 7 times beneath itself so that the first 8 spheres have their beginning, middle and end separated.
 G2889: Enter "=G45" by entering = and then locating the subtotal in the upper window in cell G45 and clicking on it. Do this for each such subtotal, separated by 40 rows, so you cannot just fill down.
 Observe THE PATTERN that emerges and how the the spheres are directionally shifted in terms of x and y back and forth.

GOAL SEEKING Y'S TO ZERO:
 I2891: Enter "=0H2891" w/o quotes.
 Do menu item Tools Goal seek Set Cell I2891 To Value 0 By changing cell, and then click over to worksheet Data (2) cell B2 and select it, so you have 'Data (2)'!$B as the By changing cell response, and click OK.
 Relocate to THE PATTERN at worksheet Data cell H2888 and notice that ALL the Y's have gone to zero, and perhaps all the X's as well. I've seen both occur.
 Check the all the charts and observe the differences in roundness, spread, etc.
 It may just be that 0.778674031976484 is a better overall factor to use than the Golden Mean.
 See below for the final charts.
Final Charts
 GM=Other is 0.778674031976488 instead of .75  FINAL CHARTS:

GM Other has changed, Full Chart

GM Other has changed, Partial Chart

GM Other has changed, Data Summary
 Prior Pattern with GM Other = .75 (first 8 spheres of the total 24)
 Now for something totally unexpected! I dropped the zdimension totally out of the calculation for Main X and Main Y, i.e. Main X's formula is (on Data (2)): "=((SIN(A6/(B6*2))*GM*COS(A6)*GM)+C6)/ShrinkExpand" and Main Y's formula is: "=((SIN(A6/(B6*2))*GM*SIN(A6)*GM)+D6)/ShrinkExpand". And here are the results, which are amazing (GM=Other is set to 0.778674031976488):
 One half of the spheroids appear!
 At the top of the No Z Summary, one can see that the TOTAL DIFFERENCE is 0, 0!!! This is with one chart doing 24 spheroids and one doing only 12!!
 These results are, so far, totally mystifying ...
Explanation of the Basic Curve
 Basically, to understand my work, you need to begin by grasping the following:

In Excel, if I let the x value of {x, y} Cartesian coordinate pairs of a graph equal the cosine of rows 0 to 360, and then I let the y values equal the sines of rows 0 to 360  I have just taken all those row numbers and treated them as angles, right?So the result is a circle.

In the Garthwaite Curve  that ring of spiral balls you see me use all the time in many various ways  I found out how to get 3dimensionality out of Excel, by combining the zdimension formula in with x and y (or in some other curves, just with y).

The formula for the "ball", formally called a "spherical helix", is short but a little difficult to explain, so I won't.Suffice it to say that it multiplies the sine by the cosine and again by a cosine, or the sine by the sine and then by the cosine, of various values  be they constants or variables. Now the sine of an angle, given r=the hypotenuse, is y/r, and the cosine of an angle is x/r. If we let r=1, then sine = just the distance up the y axis and the cosine = just the distance along the horizontal x axis.

Imagine a triangle made by extending the hypotenuse at 30 degrees, then 45 degrees, then 60 degrees.At first, x is longer than y is tall. Then, at 45 degrees, both are equal. Then at 60 degrees, the roles are the exact reverse of what they were at 30 degrees and y is now taller than x is short by exactly the amount that x was longer than y at 30 degrees. So, therefore, in a circle, if the sine is long, the cosine is short and vice versa, or they're even. It's also possible that they measure 1 or 0, but those are the maximum and minimum values for a unit circle of radius r = the hypotenuse = 1.

And, for other curves, we are usually distorting the sine and/or cosine by adding/multiplying/subtracting or dividing it by something else.

Just when you think you understand, and you say to yourself, "Aha!Then the sine times the cosine produces a rectangle, the diagonal of which is the radius! I get it! I'm a genius!" ... it's not quite that simple, and yet it is also exactly that simple at the same time. It's just that the sine times the cosine do not define the endpoint of that diagonal when multiplied together, any more than 4*6 = 24 says anything about the point {4, 6} at the corner of the rectangle. Seems unfair, I know! I can sympathize, believe me. But you are a genius perhaps if you can agree that their multiplication as their values change produces the sequence (0, .25, .50, .25, 0, .25, .50, .25, 0, .25, .50, .25, 0, .25, .50. .25, 0)!!!

Why?Because at 45 degrees, the sine and cosine = 1/2 the square root of .5, or .7071, and so there are 4 occurrences of .50 (2 positive and 2 negative), because there are 4 places on the circle where the sine and cosine are equidistant from the x and y axes. The .25's occur at each 15 degrees and there are 8 of those, two on either side of a .50. Then, there are 5 zeros: at 0 degrees, 90 degrees, 180, 270 and 360 degrees. Of course there are a lot of other values in between the 0 and the .25 and the .50, etc, etc., but that is the main way to understand it. This is then a "halfcurve", relatively speaking.

So if the sine and cosine vary between 0 and 1 ordinarily (without further adjustment), and they are ADDED together as one is small and the other is large, they will tend to equal 1.But if they are MULTIPLIED, they will equal at most .50 and at least, .50

If you can grasp that much, you are ahead of the game in terms of grasping trig and its ability to produce beautiful and unique designs that possess a unique clarity of definition, because when the "halfcurve" is applied to a variable of 10pi to 0, the result is 5pi turns of the spiral of the helix of the sphere from one endpoint of 0 to the other endpoint of 0, which is a nice aesthetic number of turns to behold as a minimum.
Helpful Guidance

Make use of helper articles when proceeding through this tutorial:
Community Q&A
Search
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Warnings
 ERRORS: If there are unplanned errors or error values, either the sheet in incomplete and needs further input or Lookup Tables for critical variables or perhaps there's a mistake somewhere along the line. If the instructions have been completed and there are still errors, select the cell that has the error value that is furthest left and topmost first. Look for a typo in a formula or unmatched parentheses. Possibly, a Defined Name is wrong  they need to be input into the formulas exactly as they were defined. Do Insert Name Define to check. If there is a #DIV/0! error, the example does not, so look for a variable that somehow did not get filled in with a value perhaps. At any rate, what to do is select the cell with the error, and after checking all those typical errors, do Tools Auditing Trace Precedents and/or Trace Error. If fixing all the topmost leftmost errors does not fix the rest of your errors on the worksheet, one may need to do it the hard way, from the bottom right upwards then leftwards; that is the slow but sure way to fix all errors.
 Also, errors in the chart data will most likely plot as zeros. This may be acceptable or desirable even. However, if too many lines (or curves) are returning to 0, it may indicate a logical flaw in the data  or too many tiny values and then perhaps rescaling the chart is needed by inspecting the horizontal and vertical axes and changing them to zero in on the problem. Hover over or click on a data marker on the series plot and then do a search in the proper column by value for that value, and identify its precedents.
Related wikiHows
Sources and Citations
 The Garthwaite Curve shown was first created by Chris Garthwaite in May of 1994 and is based upon the Spherical Helix found on page 264 "CRC Standard Curves and Surfaces" by David von Seggern, CRC, ANN ARBOR, 1993.
Video: Tidy Ribbing in the Round  A Comparison of Two Techniques
Related News
How to Write Dialogue
Paleo Stuffed Mushrooms
The Starbucks Keto White Drink Is The Newest Keto Diet Obsession
Golden Globes 2015: Who Won What
Make a plan for when the conversation is over
The Best Face Washes for Sensitive Skin 2019
So THIS Is How You Join Rita Ora’s Gang
22 Fun Pumpkin Wedding Cake Ideas For Fall
How to Turn Sunburn Into a Tan
Osborn Design Footwear
How to Handle Loved Ones Critical of Your Divorce
Instagram InstaGlam: GlitterEyeliner
How Long Does It Really Take To Get Over An Ex
Date: 12.12.2018, 20:41 / Views: 75162