Tulips Bouquet Master Class
The following materials will be required to create the “Bouquet of Tulips” ornament: - large hair clip. - 25 mm wide ribbon made of silver brocade. - stamens with large beads on the edge. - cabochon white color, 12 mm in diameter. - white satin ribbon with a width of 25 mm. - thermo-pistol. - scissors. - sewing thread with a needle. - a lighter.
Making jewelry. First you need to prepare segments of length 10 cm. They are required to create the buds of tulips. All such parts should be made 6 pieces.
Then you need to make 6 cm long pieces. They will be needed to make the outer petals of each flower. In total, these pieces need to prepare 6 pieces.
Next you need to start creating flowers. To do this, take one long piece and burn it with a cigarette lighter, protecting it from shedding.Positioning the part horizontally in front of you, turn it on the wrong side up. Then the corner of the left edge must be bent to the edge line.
The created corner needs to be folded in half.
>img src="https://sdelaysam-svoimirukami.ru/images/17/1932-zazhim-buket-tyulpanov.jpg" alt="clip a bouquet of tulips" title="clip a bouquet of tulips">
Now you need to thread the sewing thread into a needle and tie a knot on the edge. Then you need to make a straight line with a needle from small stitches. The seam should be laid at the edge of the corner, at the same time fixing its addition.
The line should go along the whole part, not reaching the edge of 2 mm. The second scorched edge of the segment should also be wrapped, completely repeating the actions on the left side.
Without cutting the thread, the created line needs to be pulled off a little and made two bartacks.
Now, starting from the corner, the segment should be twisted into a soft tubule; ix tape.After making several clips, the thread can be cut off.
It turns out a small bud, from the remaining 5 long segments you should make the same blanks, repeating each action exactly. Now of the remaining small segments need to make petals. To do this, take one part, you need to arrange it horizontally in front of you and tuck the corners on both sides. While holding the part in this position it is necessary to make a simple stitch along the edge strip with a needle for run-of-the-mill work.
The string should be stitched, and make a few fixing nodules so that the petal retains its form.
The resulting petal should be fixed on top of one of the cooked buds. Sewing a petal, the thread can be cut.
It turns out the unopened tulip bud.Of the remaining segments, you should prepare the same single petals, which then need to be fixed on the buds. As a result, you get beautiful flowers of tulips.
Now you need to make leaves for flowers . This requires a ribbon of brocade silvery. From it should be prepared 5 segments of 10 cm.
These segments need to be folded in half along their length, additionally squeezing the fold line with your fingers.
Next you should remove the corner, cutting it diagonally from the fold line and to the upper left corner.
The resulting edge should immediately be singed while soldering two layers of tape and protecting the fabric from falling.
The resulting sheet must be straightened, giving it a volume.
In the middle of this leaflet you should paste a bud createdtulip.
From the other tapes you need to make the same leaves, in the middle of which you should glue the flowers.
Now you can start assembling jewelry. Taking a piece of white tape 8 cm long, you need to scorch its sections and place it face down. One bud should be attached to its left edge.
On two sides of the flower, you need to glue two stamens with large beads on the edge.
Above the stamens, on two sides of the bud, flowers should be fixed.
The remaining three flowers must be fixed in one row, closing the junction points of the first buds.
The small edge of the warp tape remained intact; it will come in handy later.Now you need to prepare a large bow for decoration. For this you need a piece of white tape, 16 cm long.
It should be turned inside out and mark the middle, having drawn several lines in pencil.
By the middle of the segment you now need to wrap the edges of the tape, slightly overlaying them.
Having folded the part, you need to hold it with your fingers.
A needle with a threaded thread must be sewn in the middle of the part.
Christmas Tree Cross CoverKitty is a thread toyDairy products cause acneWhat to buy in the spring, not to be like everyone elseHow to make money online teen